Здравствуйте, помогите пожалуйста, при прошивке FlashTool выдаёт вот это, до этого прошивал нормально: Device synchronized. Injecting EBL Boot-loader is active EBL version: 6180_Bootloader_10.0_MKEYSKEY 10..0 Boot mode is: BB Using: Faster CRC, Writing all blocks Package length is 2048 - protocol: 1.16 Baud rate set to 57600 Get flash id. CFI stage 1 Flash ID is: 220800EC CFI stage 2 Boot process finished Start downloading item 'CUST:temp_GT-C3530_OXE.dffs'' from file 'C:\Documents and Settings\Хемуль 777\Рабочий стол\C3530XEKI1\C3530OXEKK1_CSC.dffs''. Sending sec-pack. Load region 0 Use flash pre-erase. Sending data. Process time was 3 min 3 sec. Stopped at 15% total, 73% current Timeout occured during packet reception The phone did not answer within the timeout period. This could be that the communication is interrupted or that the target SW is in an endless loop. Check the connection to the phone, battery etc. If the problem persists report the error to the developer. Channel 1 is succesfully closed.
