Перейти к содержанию
Old Phone Forum

Hemul777

Стажёр
  • Постов

    4
  • Зарегистрирован

  • Посещение

Сообщения, опубликованные Hemul777

  1. Здравствуйте, помогите пожалуйста, при прошивке FlashTool выдаёт вот это, до этого прошивал нормально:

     

    Device synchronized.

    Injecting EBL

    Boot-loader is active

    EBL version: 6180_Bootloader_10.0_MKEYSKEY 10..0

    Boot mode is: BB

    Using: Faster CRC, Writing all blocks

    Package length is 2048 - protocol: 1.16

    Baud rate set to 57600

    Get flash id.

    CFI stage 1

    Flash ID is: 220800EC

    CFI stage 2

    Boot process finished

     

    Start downloading item 'CUST:temp_GT-C3530_OXE.dffs'' from file 'C:\Documents and Settings\Хемуль 777\Рабочий стол\C3530XEKI1\C3530OXEKK1_CSC.dffs''.

    Sending sec-pack.

    Load region 0

    Use flash pre-erase.

    Sending data.

    Process time was 3 min 3 sec.

     

    Stopped at 15% total, 73% current

    Timeout occured during packet reception

    The phone did not answer within the timeout period. This could be that the communication is interrupted or that the target SW is in an endless loop.

    Check the connection to the phone, battery etc. If the problem persists report the error to the developer.

    Channel 1 is succesfully closed.

×
×
  • Создать...