Вот новая Версия http://depositfiles.com/files/9a96k3qsu
Все баги исправлены...
На Se7en тестируйте...
Версия Пропатчена и полностью рабочая...
Phoenix_Service_Software_2009_34_14_40684
New version of Phoenix service software is available. This multi-protocol service software supports Nokia
CDMA, GSM, TDMA, and WCDMA products.
Service SW installation packages and Technical Bulletins are available from NOL.
Main component versions in the release:
╖ DK2 Driver Version 07.14.0.25
╖ Nokia Connectivity Cable USB Driver Version 7.1.22.0
╖ Flash Update Package 09.048.024
╖ FLS-x Drivers Version 2.09.28
╖ FPS-11Version 5.10.0
MAIN CHANGES & ERROR CORRECTIONS FROM PREVIOUS VERSION 2009. 34.10.40495
New Products added
╖ RM-614, RM-615, RM-381, RM-598 , RM-604, RM-582, RM-521, RM-522, RM-658, RM-638, RM-
606, RM-664, RM-626
New features
╖ Flash Update Package 09.048.024
╖ RF Final Test û feature added.
- If you can find ôRF Final Testö item from ôTestingö û menu when product is connected,
product supports this function
- RF Final test uses the same product specific configuration file as RF Auto Tuning and
works when same equipment and tools are used
- If you experience problems with either function, please check the other.
- If either one works, please report issue to the product program so that data package
configuration can be checked.
Error Corrections & changes
╖ Login dialog removed
╖ Dead phone USB stability improvements
╖ Autotuning components updated to new version
╖ Label printing corrections for E72
KNOWN ERRORS & LIMITATIONS
╖ Software downgrade with Tucson system is only possible for BB 5.0 products supporting the Data
Package 2 concept.
╖ Flashing with FLS-5, SS-46 and product specific adapter is not supported anymore
╖ If you install old DCT-4 data packages, Flash Update Package File installation path may be wrong.
This is caused by very old DCT-4 data packages which contain Flash Update Package and
overwrite current information during installation. If you experience problems when updating FPS-x
prommers, please check that Phoenix ôPrommer maintenanceö is looking for the files from the
correct location which is ôC:Program FilesCommon FilesNokiaTssFlashö. If not, Phoenix will
show error ôUpdate via ini û file failedö. In this case, select ôUpdateö from that Phoenix ôPrommer
maintenanceö û UI, browse to correct directory and select ôfpsxupd.iniö for all other prommers
except the FPS-8. Multi Flash has limited capabilities, launch Multiflash UI first and then connect
phones one by one, do not attempt to service more than 5 phones at the time
╖ Some phone models request SIM Lock data to be written in wrong format. You should use special
DLL as a workaround for this product software related problem. Please see Service SW
Application ôTucson Add-On Components for SIM Lock versionsö
╖ While performing restore or variant change operations with Tucson system firmware update as a
separate activity may increase stability.
╖ Refurbishment flashing and product code change for RX-51 product requires SX-4 card to
be available
╖ FPS-21 flashing for RX-51 works only with TCPIP connection, if FPS-21 prommer HW is
older than 10. USB connection works if FPS-21 HW is 10 or newer.
╖ Please refer to product specific documents and instructions concerning the limitations of
the RX-51 product
